Tin-plated Copper Platoon

Product Description

The copper plate has good mechanical properties, good plasticity in hot state, good plasticity in cold state, good machinability, easy to be welded and welded by fiber, corrosion resistance, but easy to produce corrosion and fracture, in addition, the price is cheap, it is a common copper variety widely used

Tin plated copper platoon is a high-quality conductive material for manufacturing windings, high and low voltage electrical appliances, switch contacts, and wires for electrical installation. The oxygen-free copper bus bar produced by our company uses oxygen-free copper rod as blank material. After continuous extrusion molding, the product has such advantages as high copper content (≥99.97%), low oxygen content (≤10ppm), dense and uniform structure, and low resistivity, low resistance difference, bright surface and free supply length.

Product model: WTMR (soft state), WTMY (hard state

Introduction

1. Standard: Implementing the Chinese national standard GB/T 5585.1-2005.

2. General classification: Right angle & rounded corner (commonly known as straight edge, rounded edge).

3. Section range: 30--3000mm&sup2, Thickness range 3mm-12mm, width range 10mm-125mm.

4. Conductive performance: Closely related to the ambient temperature of the bus bar operation.

Calculating the current carrying current (40°) can be easily calculated according to the following formula: (Specification quantity units are taken in mm)

Bus bar specification: A (thickness) * B (width)

Monolithic current carrying ≈B*(A+8.5)

5. Weight calculation: At present, the copper bus bars produced are mostly 6 meters long, so the formula for calculating the weight after simplification is as below:

Weight(single copper bus bar) ≈A*B*0.0534 kg

Weight(one meter copper bus bar) ≈A*B*0.0089 kg

(Thickness: A (mm), Width: B (mm))